Zhenjiang Scharp Machinery Tools., Co.,Ltd.
Back
T-slot cutter
Product Detail
HSS DIN851 T-slot Milling Cutter.
- High Speed Steel , 6, 8, 10 & 12 Flutes.
- Standard tooth or Staggered Tooth.
- Weldon shank or threaded shank.
- Used for "T" shaped heads on existing mill slots.
- Size: 5mm-36mm.
| BOLT SIZE | d | W | d 2 | I 1 | d 1 | NO. OF |
| TEETH | ||||||
| 6 | 12.5 | 6 | 5 | 55 | 10 | 6 |
| 8 | 16 | 8 | 7 | 60 | 10 | 6 |
| 10 | 18 | 8 | 8 | 62 | 12 | 6 |
| 12 | 21 | 9 | 10 | 68 | 12 | 6 |
| 14 | 25 | 11 | 12 | 70 | 16 | 8 |
| 16* | 28 | 12 | 13 | 75 | 16 | 8 |
| 18 | 32 | 14 | 15 | 90 | 25 | 8 |
| 20* | 36 | 16 | 17 | 95 | 25 | 10 |
| 22 | 18 | 19 | 100 | 25 | 10 | |
| BOLT SIZE | d | W | d 2 | I 1 | d 1 | NO. OF |
| TEETH | ||||||
| 1/4 | 37/64 | 1/4 | 7/32 | 2.3/8 | 1/2 | 6 |
| 5/16 | 45/64 | 5/16 | 9/32 | 2.9/16 | 1/2 | 6 |
| 3/8 | 53/64 | 23/64 | 11/32 | 2.11/16 | 1/2 | 6 |
| 7/16 | 61/64 | 27/64 | 13/32 | 2.7/8 | 1/2 | 8 |
| 1/2 | 1.5/64 | 15/32 | 15/32 | 3.1/8 | 1/2 | 8 |
| 5/8 | 1.21/64 | 37/64 | 9/16 | 3.13/16 | 1" | 8 |
| 3/4 | 1.33/64 | 11/16 | 11/16 | 4.1/8 | 1" | 10 |
| 7/8 | 1.45/64 | 51/64 | 13/16 | 4.7/16 | 1" | 10 |
| 1" | 1.61/64 | 29/32 | 15/16 | 4.15/16 | 1" | 10 |
Copy product links
Long by picture save/share
National Service Hotline：
0086-511-88798218
E-mail : frankpan@scharptools.com
Address：168--27#,No.168 Dingmaoqiao Road,Zhenjiang,Jiangsu 212002 China
Copyright (©) 2020 Copyright Zhenjiang Scharp Mechanical Tools Co., LTD. All Rights Reserved
Frank
Frank